Standard 24 PoE (Gen1)
$533.00
Sold Out
Standard 16 PoE
$400.00
Standard 24 PoE
USW-24-POE (95W)
$507.00
A 24-port, Layer 2 PoE switch with a fanless cooling system.

(16) GbE PoE+, (8) GbE ports

(2) 1G SFP ports

95W total PoE availability

Fanless, silent cooling

Standard 48 PoE
$788.00
Standard 48 PoE (Gen1)
$1,117.00
Installation Guide
Technical Specifications
Mechanical
Dimensions442 x 200 x 44 mm (17.4 x 7.9 x 1.7")
WeightWithout mounting brackets: 3 kg (6.6 lb)
With mounting brackets: 3.1 kg (6.8 lb)
Enclosure materialSGCC steel
Hardware
Management interfaceEthernet In-Band
Networking interface(24) GbE RJ45 ports
(2) 1G SFP ports
PoE interface(16) PoE/PoE+ (Pins 1, 2+; 3, 6-)
Total non-blocking throughput26 Gbps
Switching capacity52 Gbps
Forwarding rate38.69 Mpps
Power methodUniversal input, 100—240V AC, 50/60 Hz
Power supplyAC/DC, internal, 120W
Supported voltage range100—240V AC
Max. power consumption25W (Excluding PoE output)
Total available PoE95W
Max. PoE wattage per port by PSE PoE+: 32W
Voltage range PoE mode PoE: 44—57V
PoE+: 50—57V
ESD/EMP protectionAir: ± 16kV, contact: ± 12kV
LCM display (1) 1.3" touchscreen
ButtonFactory reset
Shock and vibrationETSI300-019-1.4 Standard
Ambient operating temperature-5 to 40° C (23 to 104° F)
Ambient operating humidity10 to 90% noncondensing
CertificationsCE, FCC, IC
Switching Features
Layer 2 featuresIGMP snooping
STP / RSTP with priorities and port-level disable
Port isolation
Storm control
Voice VLAN
Port mirroring
LACP port aggregation
Multicast / broadcast rate limiting
MAC address blocking
Flow control
802.1X control
Jumbo frames
Proprietary loop protection
DHCP snooping / guarding
Egress rate limit
LLDP-MED
Port restricted by MAC
Device isolation with ACLs
Layer 3 features
LEDs
SystemStatus
EthernetPoE
Speed/link/activity
SFPLink/activity
Application Requirements
UniFi Network Version 7.2.94 and later